Post by Steaphany on Jul 15, 2013 2:22:35 GMT
From the Amateur Photographic Science Page:
Prepare:
Ansco 48Ma
to
add and dissolve
then add
For Ansco 48M Developer. Add 15 ml to 22 ml replenisher to Ansco 48M for each roll of 120 film (or equivalent) developed. Maintain original volume of developer, discarding if necessary some used developer. No increase in original developing time is necessary when replenisher is used in this manner.
Prepare:
Ansco 48Ma
to
| Warm Water ( ~50ºC ) | CAS # 7732-18-5 | 750 ml |
add and dissolve
| Kodak Elon ( P-Methylaminophenol Sulfate ) | CAS # 55-55-0 | 6.3 grams |
| Sodium Sulfite ( Anhydrous ) | CAS # 7757-83-7 | 30.0 grams |
| Hydroquinone | CAS # 123-31-9 | 10.0 grams |
| Sodium Metaborate | CAS # 16800-11-6 | 40.0 grams |
then add
| Cold Water ( ~20ºC ) | CAS # 7732-18-5 | to make 1,000 ml |
For Ansco 48M Developer. Add 15 ml to 22 ml replenisher to Ansco 48M for each roll of 120 film (or equivalent) developed. Maintain original volume of developer, discarding if necessary some used developer. No increase in original developing time is necessary when replenisher is used in this manner.